AYNUO

products

Packaging Vent Membrane

short description:


  • PRODUCT NAME: Packaging Vent Membrane
  • PRODUCT MODEL : AYN-E10HO
  • PRODUCT DESCRIPTION: e-PTFE Oleophobic and Hydrophobic breathable membrane
  • APPLICATION FEILD: Chemicals Packaging
  • APPLICATION RODUCTS: Low-Concentrated Pesticides or Liquid Fertilizer, etc
  • Product Detail

    Product Tags

    Membrane Properties

    PHYSICAL PROPERTIES

     

    REFERED TEST STANDARD

     

    UNIT

     

    TYPICAL DATA

     

    Membrane Color

     

     

    /

     

    /

    White

     

    Membrane Construction

     

     

    /

     

    /

    PTFE / PO non-woven

     

    Membrane Surface Property

     

     

    /

     

    /

    Oleophobic & Hydrophobic
    Thickness

     

    ISO 534 mm 0.19±0.05
    Pore Size

     

    Internal Method

     

    um 0.45
    Interlayer Bonding Strength

     

    Internal Method

     

    N/inch >2
    Min Air Flow Rate

     

    ASTM D737

     

    ml/min/cm²@ 7Kpa >500
    Typical Air Flow Rate

     

    ASTM D737

     

    ml/min/cm²@ 7Kpa 800
    Water Entry Pressure

     

    ASTM D751

     

    KPa for 30 sec >150
    Moisture Permeability

     

    ASTM E96 g/m2/24h >5000
    Oleophobic Grade

     

    AATCC 118 Grade 7
    Operation Temperature

     

    IEC 60068-2-14 C -40C ~ 100C
    ROHS

     

    IEC 62321 / Meet ROHS Requirements

     

    PFOA & PFOS

     

    US EPA 3550C & US EPA 8321B / PFOA & PFOS Free

     

     

    Application

    This series of membranes could equalize the pressure differentials of chemical containers which caused by temperature difference,  altitude  changes  and  releasing/consuming  gases,  in  order  to  prevent  container  deformation  and  liquid leakage.

    The membranes can be used in breathable liner and breathable plug products for chemicals packaging containers ,and be   suitable   for   High-concentration   Hazardous   Chemicals,   Low-concentration   Household   Chemicals,   Agricultural Chemicals and other Special Chemicals.  

    Shelf Life

    Shelf life is five years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27°C) and 60% RH.

    Note

    All data above are typical data for the membrane raw material, for reference only, and should not be used as special  data foroutgoing quality control.

    All technical information and advice given here is based on Aynuo’s previous experiences and test results. Aynuo gives  this information to the best of its knowledge, but assumes no legal responsibility. Customers are asked to check the  suitability and usability in the specific application, since the performance of the product can only be judged when all  necessary operating data are available.


  • Previous:
  • Next:

  • Write your message here and send it to us